High Gain Linear Driver
Tuning Range: 3.1 to 4.2 GHz
The GRF5236 is a high-gain, three-stage driver amplifier targeting 3.3 to 4.2 GHz wireless infrastructure applications. The device delivers up to 30.2 dBm of OP1dB, 33.2 dBm of OIP3, and a low Noise Figure (NF) of less than 4.2 dB over its targeted band of operation. OP1dB can be tuned down to 3.1 GHz, but the high frequency of the rated operating range will degrade.
For optimal efficiency and linearity, the amplifier was designed to operate with a single 5 V supply voltage while using only 85-105 mA of quiescent current. 3.3 V supplies can also be used while still yielding 26.3 dBm of OP1dB. If desired, ICCQ can be increased beyond the native biasing point for enhanced linearity performance.
The GRF5236 is designed for 50 Ω systems, typically needing only a two-element shunt-series match on the output port.
Product Categories
Applications
- Linear Driver / Pre-Driver Amplifiers
- 5G Sub-6 GHz Massive MIMO Base Stations
- Small Cells and Cellular Repeaters
- Millimeter Wave IF Stages
- High-Performance RF Infrastructure
Features
Reference: 5V/105mA/3.8GHz
- NF: 4.2 dB
- Gain: 36.3 dB
- OP1dB: 30.2 dBm
- OIP3: 33.2 dBm
- 1 dB Typical Gain Flatness (3.3 to 4.2 GHz) with a Single Tune
- Excellent Linearity Performance Over Wide Bandwidths
- Flexible Biasing Provides Latitude for Linearity Optimization
- 105 mA Native Mode Quiescent Current Consumption
- 50 Ω Single-ended Input and Output Impedances
- -40 to 115 °C Operarting Temperature Range
- Compact 3 x 3 mm QFN-16 Package